Skip to content
ShedCalc
64 sq ft · free & unbiased

8×8 Shed Material List

An 8×8 shed is the smallest size most people find genuinely useful — a tidy 64 square feet that tucks into a corner of the yard without dominating it. It's the classic 'get the clutter out of the garage' shed, and a popular first build for exactly that reason.

How much lumber for a 8×8 shed?

Here's a shopping-ready estimate for a standard 8×8 build — 8 ft walls, studs 16" on-centre, 3-stud corners, one door and a 4/12 gable roof — with a 10% waste factor already included.

2×4 boards

69

4×8 sheets

12

Roof area

67 sq ft

Wall & roof framing

  • 2×4 wall studs (8 ft)

    24 field studs (perimeter ÷ 16" spacing) + 12 corner studs (3-stud corners) + 4 for 1 door & 0 windows

    44 boards

  • 2×4 plates (12 ft)

    96 linear ft (bottom + double top plate) ÷ 12 ft

    9 boards

  • 2×4 roof rafters (8 ft)

    14 rafters (2 planes × rows at 16" spacing)

    16 boards

Sheet goods

  • Siding / wall sheathing (4×8)

    256 sq ft of wall ÷ 32 sq ft per sheet

    9 sheets

  • Roof sheathing (4×8)

    67 sq ft of roof ÷ 32 sq ft per sheet

    3 sheets

Roofing

  • Roof area

    footprint 64 sq ft × 1.054 slope factor

    67 sq ft

  • Shingle bundles (~3 / square)

    0.67 squares × 3 bundles

    3 bundles

How these numbers are worked out

  • Perimeter of 32 ft with studs at 16" on-centre.
  • 3-stud (California) corners at all 4 corners.
  • Openings framed explicitly: +4 studs per door, +6 per window (1 door, 0 windows).
  • Walls: one bottom plate + a double top plate (3 × perimeter of 2×4 stock).
  • Sheet goods are 4 ft × 8 ft (32 sq ft each).
  • Gable roof at 4/12 pitch → 1.054× the flat footprint.
  • Asphalt shingles at 3 bundles per 100 sq ft "square".
  • A 10% waste factor is added, then each quantity is rounded up.

Building a different spec?

Change the wall height, stud spacing, roof pitch, corners, doors, and windows — and copy or print the list — in the full calculator.

Open the Material Calculator

What fits in a 8×8 shed

Compact storage for a smaller yard.

  • A push or small self-propelled mower
  • Long-handled tools on a wall rack
  • Two or three bikes
  • A few shelves of bins, pots, and paint

Tips for a 8×8 build

  • At 64 square feet it can fall under the size where some areas start requiring a permit — but height and placement matter too, so always confirm with your local office.
  • Put the door on one 8-ft wall and keep a clear aisle down the middle; the depth fills up fast at this size.

Questions

8×8 shed FAQ

Straight answers on materials, capacity, permits, and cost for a 8×8 shed.

How much lumber do I need for a 8×8 shed?
For a 8×8 shed with 8 ft walls, studs at 16 inches on-centre, 3-stud corners, one door and a 4/12 roof, this calculator estimates about 44 2×4 studs, 9 boards of 2×4 plate stock and 16 roof rafters, plus roughly 9 sheets of 4×8 siding, 3 sheets of roof sheathing and 3 bundles of shingles. Those figures already include a 10% waste allowance. Adjust the spacing, pitch or openings in the calculator to match your exact design.
What can you fit in a 8×8 shed?
A 8×8 shed gives you 64 square feet. It comfortably holds a push or small self-propelled mower, long-handled tools on a wall rack, two or three bikes, a few shelves of bins, pots, and paint. Compact storage for a smaller yard.
Do I need a permit for a 8×8 shed?
It depends on where you live. At 64 square feet, a 8×8 shed is large enough that many areas require a building permit, but the rules also consider height, foundation, and how close the shed sits to property lines. Always confirm with your local building department before you start — thresholds vary from one place to the next.
How much does a 8×8 shed cost to build?
The material cost depends on your siding, roofing, foundation, and finishes, and labour varies widely by region — so a single figure would be misleading. Use the material list here as your starting quantities, add local prices, and treat the total as a planning estimate rather than a fixed quote.